Home › BODY ELECTRICAL › WIPER AND WASHER › HEADLIGHT CLEANER ACTUATOR

HEADLIGHT CLEANER ACTUATOR > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH


    B210371
  1. Attach the 2 claws to install the headlight washer actuator sub-assembly and install the bolt.

    Torque:
    1.1 N*m{ 11 kgf*cm , 10 in.*lbf }



    B210372
  1. Connect the hose as shown in the illustration.



2. INSTALL TYPE1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH


    B182297
  1. Attach the 2 claws to install the headlight washer nozzle.



    E119841
  1. Return the headlight washer nozzle to its original position.



3. INSTALL FRONT BUMPER COVER
  1. Install the front bumper cover (Click here).