Home › ENGINE ยท 2KD-FTV › FUEL › INJECTOR DRIVER

INJECTOR DRIVER > INSTALLATION

for Preparation Click here



1. INSTALL INJECTOR DRIVER BRACKET (w/o EGR Cooler)


    G038053E02
  1. for LHD:
    Install the injector driver bracket with the 3 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



    A098863E01
  1. for RHD:
    Install the injector driver bracket with the 3 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



2. INSTALL INJECTOR DRIVER BRACKET (w/ EGR Cooler)


    A224468
  1. for LHD:
    Install the injector driver bracket with the 3 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



    A211900
  1. for RHD:
    Install the injector driver bracket with the 3 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



3. INSTALL INJECTOR DRIVER (w/o EGR Cooler)


  1. for LHD:



      G038052E04
    1. Install the injector driver with the 2 bolts.

      Torque:
      8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    2. Connect the 2 connectors.



  1. for RHD:



      A098862E01
    1. Install the injector driver with the 2 bolts.

      Torque:
      8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    2. Connect the 2 connectors.



4. INSTALL INJECTOR DRIVER (w/ EGR Cooler)


  1. for LHD:



      A224467
    1. Install the injector driver with the 2 bolts.

      Torque:
      8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    2. Connect the 3 connectors.



  1. for RHD:



      A211899
    1. Install the injector driver with the 2 bolts.

      Torque:
      8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    2. Connect the 3 connectors.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).