YAW RATE AND DECELERATION SENSOR (w/ VSC) > INSTALLATION |
| 1. INSTALL YAW RATE SENSOR ASSEMBLY |
![]() |
Connect the connector.
Set the yaw rate sensor to the crossmember.
| 2. INSTALL SENSOR BRACKET |
![]() |
Install the sensor bracket with the 2 bolts.
| 3. INSTALL FLOOR CARPET COVER |
Insert the floor carpet cover into the sensor bracket.
Insert the positioning boss of the floor carpet cover into the hole in the bracket of the sensor.
Attach the 4 claws to install the floor carpet cover.
| 4. INSTALL FRONT SEAT ASSEMBLY RH |
Install the front seat assembly RH (Click here).
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION |
Perform the yaw rate sensor zero point calibration (Click here).
| 7. CHECK YAW RATE SENSOR SIGNAL |
Check the yaw rate sensor signal (Click here).