Home › BRAKE › BRAKE CONTROL › YAW RATE AND DECELERATION SENSOR (w/ VSC)

YAW RATE AND DECELERATION SENSOR (w/ VSC) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE FRONT SEAT ASSEMBLY RH
  1. Remove the front seat assembly RH (Click here).



3. REMOVE FLOOR CARPET COVER


    C189946
  1. Detach the 4 claws and remove the floor carpet cover.



4. REMOVE SENSOR BRACKET
  1. Remove the 2 bolts and sensor bracket.



5. REMOVE YAW RATE SENSOR ASSEMBLY


    C189947E01
  1. Disconnect the connector.

  1. Remove the yaw rate sensor.