Home › ENGINE ยท 1GR-FE › ENGINE CONTROL SYSTEM › KNOCK SENSOR

KNOCK SENSOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE ENGINE ASSEMBLY
  1. Remove the engine (Click here).



3. REMOVE CYLINDER HEAD
  1. Remove the cylinder head (Click here).



4. REMOVE KNOCK SENSOR


    A075662E01
  1. Disconnect the sensor connector.

  1. Remove the bolt and sensor.