VEHICLE STABILITY CONTROL SYSTEM > DIAGNOSIS SYSTEM |
| DESCRIPTION |
Check the battery voltage.
| DIAGNOSIS |
If the skid control ECU (brake actuator assembly) detects a malfunction, the ABS warning, brake warning and slip indicator lights will come on in accordance with the trouble area to warn the driver.
The DTCs are simultaneously stored in memory.
The DTCs can be read by connecting SST between terminals TC and CG of the DLC3 and observing the blinking pattern of the ABS warning and slip indicator lights, or by connecting the intelligent tester (Click here).
This system has a Test Mode (signal check) function (Click here).
| WARNING LIGHT AND INDICATOR LIGHT INITIAL CHECK |
Release the parking brake.
When the ignition switch is turned to ON, check that the ABS warning, brake warning, TRC OFF, VSC OFF and slip indicator lights come on for approximately 3 seconds.