REAR SPEED SENSOR > INSTALLATION |
| 1. INSTALL SKID CONTROL SENSOR CLAMP |
![]() |
Install the skid control sensor clamp with the bolt.
| 2. INSTALL REAR SPEED SENSOR RH |
Install the speed sensor with the bolt.

Attach the 6 clamps.
Connect the connector.
Attach the connector to the skid control sensor clamp.
| 3. INSTALL REAR SPEED SENSOR LH |
Install the speed sensor with the bolt.

Attach the 3 clamps.
Connect the connector.
Attach the connector.
| 4. INSTALL REAR WHEEL |
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. CHECK SPEED SENSOR SIGNAL |
w/ ABS:
Check the speed sensor signal (Click here).
w/ VSC:
Check the speed sensor signal (Click here).