Home › BRAKE › BRAKE CONTROL › DECELERATION SENSOR (w/ ABS)

DECELERATION SENSOR (w/ ABS) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE FRONT SEAT ASSEMBLY RH
  1. Remove the front seat assembly RH (Click here).



3. REMOVE FLOOR CARPET COVER


    C189946
  1. Detach the 4 claws and remove the floor carpet cover.



4. REMOVE SENSOR BRACKET
  1. Remove the 2 bolts and sensor bracket.



5. REMOVE DECELERATION SENSOR


    C189945E01
  1. Disconnect the deceleration sensor connector.

  1. Remove the deceleration sensor.