BRAKE ACTUATOR (for RHD with VSC) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. DRAIN BRAKE FLUID |
| 3. REMOVE BRAKE ACTUATOR ASSEMBLY |
![]() |
Use tags or make a note to identify the reconnection locations.
![]() |
Release the latch of the actuator connector and disconnect the connector.
Using a union nut wrench, disconnect the 6 brake lines from the actuator.
Detach the brake line from the tube clamp.
Remove the 3 nuts and actuator with bracket.
![]() |