FRONT DIFFERENTIAL CARRIER ASSEMBLY > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
| 2. REMOVE NO. 2 ENGINE UNDER COVER |
| 3. DRAIN DIFFERENTIAL OIL |
for front differential:
Stop the vehicle on a level surface.
![]() |
Using SST and the 10 mm straight hexagon wrench, 10 mm union nut wrench and socket adaptor, remove the differential filler plug and gasket.
| *1 | 10 mm Straight Hexagon Wrench |
| *2 | 10 mm Union Nut Wrench |
| *3 | Socket Adaptor |
Remove the drain plug and gasket, and drain the oil.
Install a new gasket and the drain plug.
for rear differential:
Stop the vehicle on a level surface.
Remove the differential filler plug and gasket.
Remove the drain plug and gasket, and drain the oil.
Install a new gasket and the drain plug.
| 4. REMOVE FRONT PROPELLER SHAFT ASSEMBLY |
| 5. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH |
| 6. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH |
| 7. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY |
Remove the bolt and disconnect the differential breather tube bracket.
Support the differential with a jack.
![]() |
Remove the No. 1 differential mounting nut.
| *1 | Mounting Bolt |
| *2 | Mounting Nut |
Remove the 2 mounting bolts and 2 nuts.
Lower the jack and remove the front differential.
![]() |
Remove the 3 bolts and front No. 1 differential support.
Remove the 2 mount stoppers from the differential support.
![]() |
Remove the 2 bolts and front No. 2 differential support.
Remove the 2 mount stoppers from the differential support.
![]() |
Remove the 2 bolts and front No. 3 differential support.