POWER WINDOW CONTROL SYSTEM > TERMINALS OF ECU |
| CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY |
![]() |
Disconnect the P6 power window regulator master switch assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| P6-6 (B) - Body ground | L - Body ground | Ignition power supply | Ignition switch off | Below 1 V |
| Ignition switch ON | 11 to 14 V | |||
| P6-7 (BW) - Body ground | L-B - Body ground | Regulator motor power supply | Always | 11 to 14 V |
| P6-1 (E) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
Reconnect the P6 power window regulator master switch assembly connector.
Reset the front door window regulator sub-assembly (for driver side) (Click here).
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| P6-4 (U) - P6-1 (E) | R - W-B*1 B - W-B*2 | Front door window regulator sub-assembly (for driver side) up output | Ignition switch ON, driver side power window switch off → up (manual operation) | Below 1 V → 11 to 14 V |
| Ignition switch ON, driver side power window fully open → driver side power window switch up (auto operation) → driver side power window fully closed | Below 1 V → 11 to 14 V → Below 1 V | |||
| P6-9 (D) - P6-1 (E) | L-R - W-B | Front door window regulator sub-assembly (for driver side) down output | Ignition switch ON, driver side power window switch off → down (manual operation) | Below 1 V → 11 to 14 V |
| Ignition switch ON, driver side power window fully closed → driver side power window switch down (auto operation) → driver side power window fully open | Below 1 V → 11 to 14 V → Below 1 V | |||
| P6-13 (U) - P6-1 (E) | R-L - W-B | Front door window regulator sub-assembly (for front passenger side) up output |
| Below 1 V → 11 to 14 V |
| P6-15 (D) - P6-1 (E) | G-W - W-B | Front door window regulator sub-assembly (for front passenger side) down output |
| Below 1 V → 11 to 14 V |
| P6-12 (U) - P6-1 (E) | R-Y - W-B | Rear door window regulator sub-assembly LH up output |
| Below 1 V → 11 to 14 V |
| P6-10 (D) - P6-1 (E) | G-Y - W-B | Rear door window regulator sub-assembly LH down output |
| Below 1 V → 11 to 14 V |
| P6-18 (U) - P6-1 (E) | R-B - W-B | Rear door window regulator sub-assembly RH up output |
| Below 1 V → 11 to 14 V |
| P6-16 (D) - P6-1 (E) | G-B - W-B | Rear door window regulator sub-assembly RH down output |
| Below 1 V → 11 to 14 V |
| P6-3 (VCC) - P6-2 (GND) | BR - L-O | Motor sensor power source | Ignition switch ON, driver side power window switch off → up or down | Below 1 V → 11 to 14 V |
| P6-14 (PLS) - Body ground | P-G - Body ground | Front door window regulator sub-assembly (for driver side) up or down output | Ignition switch ON, driver side power window switch off → up or down | Pulse waveform is output |
| P6-17 (PLS2) - Body ground | B - Body ground |