Transfer system
Symptom
| Suspected Area
| See page
|
Noise
| 1. Oil (level low)
|
Click here
|
2. Oil (wrong)
|
Click here
|
3. Transfer (faulty)
|
Click here
|
Oil leakage
| 1. Oil (level too high)
|
Click here
|
2. Gasket (damaged)
|
Click here
|
3. Oil seal (worn or damaged)
|
Click here
|
4. O-ring (worn or damaged)
|
Click here
|
Hard to shift or will not shift
| 1. Shifting key spring (damaged)
|
Click here
|
2. Synchronizer spring (worn or damaged)
|
Click here
|
Shift from HL to H impossible
| 1. Indicator switch (for center differential lock position)
|
Click here
|
2. Wire harness
|
Click here
|
3. Skid control ECU with actuator
|
Click here
|
4. ECM (for Automatic Transmission)
|
Click here
|
Shift from H to HL impossible
| 1. Indicator switch (for center differential lock position)
|
Click here
|
2. Wire harness
|
Click here
|
3. Skid control ECU with actuator
|
Click here
|
4. ECM (for Automatic Transmission)
|
Click here
|
Shift from H to LL impossible
| 1. Indicator switch (for center differential lock position)
|
Click here
|
2. Indicator switch (for LL position)
|
Click here
|
3. Indicator switch (for neutral position) (for Automatic Transmission)
|
Click here
|
4. Wire harness
|
Click here
|
5. Skid control ECU with actuator
|
Click here
|
6. ECM (for Automatic Transmission)
|
Click here
|
Shift from LL to H impossible
| 1. Indicator switch (for center differential lock position)
|
Click here
|
2. Indicator switch (for LL position)
|
Click here
|
3. Indicator switch (for neutral position) (for Automatic Transmission)
|
Click here
|
4. Wire harness
|
Click here
|
5. Skid control ECU with actuator
|
Click here
|
6. ECM (for Automatic Transmission)
|
Click here
|