Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)

FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE FRONT SEAT ASSEMBLY RH
  1. Remove the front seat (Click here).



3. REMOVE FRONT SEAT ASSEMBLY LH
  1. Remove the front seat (Click here).



4. REMOVE FRONT SEAT INNER CUSHION SHIELD RH


    B278519
  1. Remove the screw.

  1. Detach the claw and guide.



    B278520
  1. Pull the front seat inner cushion shield RH to detach the claw and remove the front seat inner cushion shield RH.



5. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH
  1. Disconnect the connector and detach the 3 clamps.



    B203284
  1. Remove the nut and front seat inner belt assembly.

  1. Remove the buckle cover.



6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


B360201E02
  1. w/ Passenger Seat Belt Warning Light:
    Detach the 2 clamps.

  1. w/ Passenger Seat Belt Warning Light:
    Disconnect the connector.



    B089297E01
  1. w/ Passenger Seat Belt Warning Light:
    Detach the wire harness from the clamp.

  1. Remove the nut and seat belt.

  1. Remove the buckle cover.