Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)

FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE FRONT SEAT ASSEMBLY RH
  1. Remove the front seat (Click here).



4. REMOVE FRONT SEAT ASSEMBLY LH
  1. Remove the front seat (Click here).



5. REMOVE FRONT SEAT INNER CUSHION SHIELD RH


    B278519
  1. Remove the screw.

  1. Detach the claw and guide.



    B278520
  1. Pull the front seat inner cushion shield RH to detach the claw and remove the front seat inner cushion shield RH.



6. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH
  1. Disconnect the connector and detach the 3 clamps.



    B203284
  1. Remove the nut and front seat inner belt assembly.

  1. Remove the buckle cover.



7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


B360201E02
  1. w/ Passenger Seat Belt Warning Light:
    Detach the 2 clamps.

  1. w/ Passenger Seat Belt Warning Light:
    Disconnect the connector.



    B089297E01
  1. w/ Passenger Seat Belt Warning Light:
    Detach the wire harness from the clamp.

  1. Remove the nut and seat belt.

  1. Remove the buckle cover.