STARTER (for 2.2 kW Type) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT FENDER SEAL |
Remove the 5 clips and seal.
| 3. REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() |
Remove the 2 bolts and clutch release cylinder.
| 4. REMOVE STARTER ASSEMBLY |
![]() |
Disconnect the starter connector.
Remove the nut and disconnect the starter wire.
![]() |
Remove the 2 bolts and disconnect the ground wire.
| *1 | Ground wire |
Remove the stater.