REAR DOOR SPEAKER > INSTALLATION |
| 1. INSTALL REAR SPEAKER ASSEMBLY |
Install a nose piece to an air riveter or hand riveter. Then insert the mandrel part of a new φ4 mm waterproof rivet into the nose piece.
![]() |
Using an air riveter or hand riveter, install the speaker with 3 new rivets.
![]() |
| *1 | Mandrel |
| *2 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
![]() |
| *1 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
![]() |
| *1 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
Connect the connector.
| 2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH |
Attach the 10 clips to install the rear door trim board.
Install the screw.
| 3. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL |
Connect the connector.
Attach the 2 claws and 2 clips to install the rear power window regulator switch assembly with rear door armrest base panel.
| 4. INSTALL DOOR PULL HANDLE |
Install the door pull handle with the screw.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |