POWER WINDOW CONTROL SYSTEM > Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated) |
| 1.RESET FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY (FOR DRIVER SIDE) |
Reset the front door window regulator sub-assembly (for driver side) (Click here).
Check that the power window auto up/down function operates normally.
|
| ||||
| OK | ||
| ||
| 2.CHECK WINDOW GLASS SLIDING MOVEMENT (APPLICABLE LOCATION) |
Remove the installation bolt of the door glass and hold the glass by hand. When raising the glass by hand, check that the glass moves smoothly.
|
| ||||
| OK | ||
| ||