Home › BRAKE › BRAKE CONTROL › SKID CONTROL BUZZER (w/ VSC)

SKID CONTROL BUZZER (w/ VSC) > REMOVAL

for Preparation Click here



1. PRECAUTION

CAUTION:
Be sure to read the "PRECAUTION" thoroughly before servicing (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
  1. Remove the upper instrument panel sub-assembly (Click here).



4. REMOVE SKID CONTROL BUZZER ASSEMBLY


    C189948
  1. Detach the clamp and remove the buzzer.

  1. Disconnect the buzzer connector.