Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Radio Receiver Type)

DTC    62-41    Wrong Disc

DTC    62-42    Disc cannot be Read

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
62-41
An unsuitable disc is inserted.
  1. Disc
  2. Radio receiver assembly
62-42
The disc cannot be read.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks in the disc.



NG
CHANGE DISC
OK


2.DISC CLEANING


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.


NEXT


3.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

USE SIMULATION METHOD TO CHECK (Click here)  

4.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with another normal one.

  1. Clear the DTCs (Click here).

  1. Check for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END (DISC IS FAULTY)