Home › ENGINE ยท 2KD-FTV › FUEL › INJECTOR DRIVER

INJECTOR DRIVER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE INJECTOR DRIVER ASSEMBLY


    A231857
  1. Disconnect the 3 connectors.

  1. Remove the 2 bolts and injector driver assembly.



3. REMOVE INJECTOR DRIVER BRACKET


    A211900
  1. Remove the 3 screws and injector driver bracket.