TRANSPONDER KEY AMPLIFIER > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE STEERING COLUMN LOWER COVER |
![]() |
Remove the 3 screws and lower cover.
| 3. REMOVE STEERING COLUMN UPPER COVER |
Detach the claw and remove the upper cover.
| 4. REMOVE TRANSPONDER KEY AMPLIFIER |
![]() |
Using a screwdriver, widen the claw attached to the upper bracket by approximately 1.0 mm (0.039 in.).
Pull out the transponder key amplifier with the claw open.
Disconnect the connector and transponder key amplifier.