Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO ANTENNA CORD

RADIO ANTENNA CORD > INSTALLATION

for Preparation Click here



1. INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)


  1. Install the antenna cord with the clamp bolt.


    E225167

  1. Attach the 4 clamps.

  1. Connect the connector.



2. INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)


  1. Install the antenna cord with the clamp bolt.


    E225165

  1. Attach the 6 clamps.

  1. Connect the connector.



3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



5. CHECK SRS WARNING LIGHT