Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

DTC    B1550    DAB Tuner Malfunction

DTC    B1552    Extension Module Malfunction

DTC    B1564    Digital Radio Disconnected

DTC    B156C    Extension Module Disconnected

DTC    B157D    DAB Tuner Antenna Disconnected

DTC    B157E    Bluetooth Antenna Disconnected

DTC    B158A    Extension Module Noise Adjustment Malfunction

for Preparation Click here


DESCRIPTION

These DTCs are stored when a malfunction occurs in optional equipment.

DTC Code
DTC Detection Condition
Trouble Area
B1550
Digital radio tuner has a malfunction.
Radio and display receiver assembly
B1552
Extension module has a malfunction.
Radio and display receiver assembly
B1564
Digital radio tuner is disconnected.
  1. Radio and display receiver assembly
  2. Harness or connector
B156C
Extension module is disconnected.
  1. Radio and display receiver assembly
  2. Harness or connector
B157D
DAB Tuner Antenna Disconnected.
  1. Radio and display receiver assembly
  2. Harness or connector
B157E
Bluetooth Antenna Disconnected.
  1. Radio and display receiver assembly
  2. Harness or connector
B158A
Extension module noise adjustment malfunction is present.
  1. Radio and display receiver assembly
  2. Harness or connector

INSPECTION PROCEDURE

1.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
  1. Disconnect the connector for optional equipment from the radio and display receiver assembly.

  1. Check that there are no damage in terminals or parts of the radio and display receiver assembly connector.

    OK:
    There are no damage in terminals or parts.



NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
OK


2.CHECK HARNESS AND CONNECTOR
  1. Check that there are no damage in terminals or parts in the optional equipment connector.

    OK:
    There are no damage in terminals or parts.



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


3.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs and check if the same trouble occurs again.

    OK:
    No DTCs are output.



NG
Go to step 4
OK

USE SIMULATION METHOD TO CHECK (Click here)  

4.REPAIR OR REPLACE OPTIONAL EQUIPMENT
  1. Refer to optional equipment's manual for repair information.


NEXT


5.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs and check if the same trouble occurs again.

    OK:
    No DTCs are output.



NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
OK

END