Disc cannot be Inserted or is Ejected Right After Insertion
Circuit diagnosis · Vehicles built from Aug 2013
INSPECTION PROCEDURE
| 1. CHECK IF A PROPER DISC IS INSERTED |
Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.
- OK:
- Normal disc.
- HINT:
- Translucent or uniquely-shaped CDs cannot be played.
- CDs with adhesive paper labels should not be played.
- Commercial audio CDs can be played.
- CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
- CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
- For details on playable CDs, refer to the Owner's Manual.
- Translucent or uniquely-shaped CDs cannot be played.
|
|
||||
| OK | |
| 2. CHECK THAT DISC IS INSERTED PROPERLY |
Check whether or not the disc is inserted upside down.
- OK:
- Disc is properly inserted.
|
|
||||
| OK | |
| 3. CLEAN DISC AND RECHECK |
Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.

- OK:
- Malfunction disappears.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
|
|
||||
| OK | ||
| ||
| 4. REPLACE DISC AND RECHECK |
Replace the disc with a known good one.
Check that the malfunction disappears.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
