CD cannot be Ejected
Circuit diagnosis · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
INSPECTION PROCEDURE
- HINT:
- When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for T-Connect.
| 1. PRESS "EJECT" AND CHECK OPERATION |
 |
Press the disc eject switch of the radio and display receiver assembly for 2 seconds or more and check that the disc is ejected.
- OK:
- Disc is ejected.
|
NG |
 |
|
| REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
|
|
|
| OK |
|
 |
|
| 2. REPLACE DISC AND RECHECK |
 |
Replace the disc with a known good one and check that the malfunction disappears.
- OK:
- Disc is ejected.
|
NG |
 |
|
| REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
|
|
|
| OK |
|
 |
|
|