2014 Hilux · Service Manual BODY ELECTRICAL

CD Sound Skips

Circuit diagnosis · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

INSPECTION PROCEDURE


1. CHECK CD

  1. I100151
    Check the CD.

    OK:
    The CD is clean.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.

    HINT:
    If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



NG
CLEAN CD
OK


2. CHECK CD

  1. I100152
    Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks in the CD.



NG
CHANGE CD
OK


3. CHECK OPERATION USING ANOTHER CD
  1. Check if the problem recurs using another CD.

    OK:
    The problem does not occur.



NG
Go to step 4
OK

END

4. CHECK RADIO RECEIVER ASSEMBLY
  1. Check that the radio receiver assembly is properly installed.

    OK:
    Radio receiver assembly is properly installed.



NG
REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY
OK

REPLACE RADIO RECEIVER ASSEMBLY (Click here)


← CD cannot be Inserted / Played or CD is Ejected Right After Insertion (from Aug 2013)CD Sound Skips (Aug 2012 – Jul 2013) →