REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
|
 |
for Manual Air Conditioning System:
- Put protective tape around the center instrument cluster finish panel.
Text in Illustration
*1
|
Protective Tape
|
Using a moulding remover, detach the 10 claws and 4 clips.
- Detach the 4 claws and disconnect the air conditioner control.
Disconnect the connectors and remove the center instrument cluster finish panel.
for Automatic Air Conditioning System:
- Put protective tape around the center instrument cluster finish panel.
Text in Illustration
*1
|
Protective Tape
|
Using a moulding remover, detach the 8 claws and 4 clips.
Disconnect the connectors and remove the center instrument cluster finish panel.
| 3.
REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type) |
 |
w/ CD Player:
- Remove the 4 screws.
Disconnect all the connectors and remove the radio receiver assembly with bracket.
w/ Cassette Tape Player:
- Remove the 4 screws.
Disconnect all the connectors and remove the radio receiver assembly with bracket.
| 4.
REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type) |
 |
- Remove the 4 screws.
Disconnect all the connectors and remove the radio receiver assembly with bracket.
| 5.
REMOVE NO. 1 RADIO BRACKET (w/ Cassette Tape Player) |
 |
- Remove the 4 screws, radio receiver panel RH and No. 1 radio bracket from the radio receiver.
| 6.
REMOVE NO. 1 RADIO BRACKET (for Radio Receiver Type) |
 |
- Remove the 3 screws and No. 1 radio bracket from the radio receiver.
| 7.
REMOVE NO. 1 RADIO RECEIVER BRACKET (for Radio and Display Type) |
 |
- Remove the 3 screws and No. 1 radio bracket from the radio receiver
| 8.
REMOVE NO. 2 RADIO BRACKET (w/ Cassette Tape Player) |
 |
- Remove the 4 screws, radio receiver panel LH and No. 1 radio bracket from the radio receiver.
| 9.
REMOVE NO. 2 RADIO BRACKET (for Radio Receiver Type) |
 |
- Remove the 3 screws and No. 2 radio bracket from the radio receiver.
| 10.
REMOVE NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type) |
 |
- Remove the 3 screws and No. 2 radio bracket from the radio receiver.