Panel Switches do not Function
Circuit diagnosis · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
INSPECTION PROCEDURE
- HINT:
- For vehicles equipped with an Extension Module, refer to optional equipment's manuals.
| 1. CHECK PANEL SWITCH |
 |
Check for foreign matter around the switches that might prevent operation.
- OK:
- No foreign matter is found.
|
NG |
 |
|
| REMOVE ANY FOREIGN MATTER FOUND |
|
|
| OK |
|
 |
|
| 2. CHECK PANEL SWITCH |
 |
- Enter the "Function Check/Setting I" and select "Panel & Steering Switch" (Click here).
Operate the abnormal switch and check if the number of switches pushed and the switch status are correctly displayed.
- OK:
- The number of switches pushed and the switch status are correctly displayed as operated.
|
NG |
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
|
|