Illumination for Panel Switch does not Come on with Tail Switch ON
Circuit diagnosis · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
INSPECTION PROCEDURE
| 1. CHECK VEHICLE SIGNAL |
 |
Enter the "Function Check/Setting I" and select "Vehicle Signal" (Click here).
Check that the display changes between ON and OFF according to the light control switch operation.
- OK:
Light Control Switch Condition
|
Display
|
TAIL or HEAD
|
ON
|
OFF
|
OFF
|
- HINT:
- The display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.
|
NG |
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
|
|