2014 Hilux · Service Manual BODY ELECTRICAL

Display does not Dim when Light Control Switch is Turned ON

Circuit diagnosis · Vehicles built from Aug 2013

INSPECTION PROCEDURE


1. CHECK IMAGE QUALITY SETTING

  1. E278312E01
    Display the "Display Settings" screen.

  1. Turn the light control switch to the tail or head position.

  1. Check if "Day Mode" setting on the display adjustment screen is on.

    Result 
    Result
    Proceed to
    "Day Mode" setting is on
    A
    "Day Mode" setting is off
    B
    Text in Illustration 
    *a
    Example



B
Go to step 2
A

TURN "Day Mode" SETTING OFF

2. CHECK VEHICLE SIGNAL (OPERATION CHECK)

  1. E225854
    Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (Click here).

  1. Check that the display changes between ON and OFF according to the light control switch operation.

    OK 
    Light Control Switch
    Display
    Tail or head
    ON
    Off
    OFF

    HINT:
    The display is updated once per second. It is normal for the display to lag behind the actual switch operation.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)


← Illumination for Panel Switch does not Come on with Tail Switch ON (from Aug 2013)Panel Switches do not Function (from Aug 2013) →