Touch Panel Switch does not Function
Circuit diagnosis · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
INSPECTION PROCEDURE
- HINT:
- When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for T-Connect.
| 1. CHECK TOUCH PANEL |
 |
Check for foreign matter on the display.
- OK:
- The display is clean.
|
NG |
 |
|
| CLEAN DISPLAY AND RECHECK TOUCH PANEL |
|
|
| OK |
|
 |
|
| 2. CHECK TOUCH SWITCH (OPERATION CHECK) |
 |
- Enter the "Touch Switch Check" screen. [Refer to Check Touch Switch in Operation Check (Click here)]
Touch the display in the area where the switch malfunction occurs.
- OK:
- A "+" mark appears at the touched position.
|
NG |
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
|
|