Screen Flicker or Color Distortion
Circuit diagnosis · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
INSPECTION PROCEDURE
- HINT:
- For vehicles equipped with an Extension Module, refer to optional equipment's manuals.
| 1. CHECK DISPLAY SETTING |
 |
Press the "SETUP" switch and select the "Display" button.
Select the "General" and enter the "Display (General)" screen.

Text in Illustration
*a
|
Example
|
-
|
-
|
Reset the display settings (contrast and brightness) and check that the screen appears normal.
- OK:
- The display returns to normal.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 2. CHECK CABIN TEMPERATURE |
 |
Check that the cabin temperature is higher than -20°C (-4.0°F).
- OK:
- The cabin temperature is higher than -20°C (-4.0°F).
|
NG |
 |
|
| HEAT CABIN AND RECHECK TEMPERATURE |
|
|
| OK |
|
 |
|
| 3. CHECK COLOR BAR |
 |
- Enter the "Color Bar Check Mode" screen (Click here).
Check that the color bars match the displayed names.
- OK:
- Color bars match the displayed names.
|
NG |
 |
|
| REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
|
|
|
| OK |
|
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|