2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Jun 2011 – Jul 2013

Versions by build date: Jun 2011 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

B278058E01
  1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    Text in Illustration 
    *1
    Stopper

  1. B278059E01
    Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
    Text in Illustration 
    *1
    Hinge


3. REMOVE 4WD CONTROL ECU (for 4WD)

  1. A114289
    Disconnect the connector.

  1. Remove the bolt and ECU.


4. REMOVE ECM
  1. Disconnect the 4 connectors.

  1. A114276
    Remove the bolt, 2 nuts and ECM.


5. REMOVE NO. 1 ECM BRACKET

  1. A114277
    Remove the 3 screws and bracket.


6. REMOVE NO. 2 ECM BRACKET

  1. A114278
    Remove the 2 screws and bracket.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2013) →