REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
| 1.
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
|
 |
Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.
Text in Illustration
*1
|
Stopper
|
- Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
Text in Illustration
*1
|
Hinge
|
| 2.
REMOVE 4WD CONTROL ECU (for 4WD) |
 |
- Disconnect the connector.
Remove the bolt and 4WD control ECU.
| 3.
REMOVE ECM |
 |
Disconnect the 4 connectors.
- Remove the bolt, 2 nuts and ECM.
| 4.
REMOVE NO. 1 ECM BRACKET |
 |
- Remove the 3 screws and No. 1 ECM bracket.
| 5.
REMOVE NO. 2 ECM BRACKET |
 |
- Remove the 2 screws and No. 2 ECM bracket.