INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL ACCELERATOR PEDAL ROD |
- NOTICE:
- This accelerator pedal does not require lubrication.
- Do not apply oil or other lubrication to the accelerator pedal rod.
- If applied, the accelerator pedal rod must be replaced.
Install the accelerator pedal rod with the 2 bolts.

- Torque:
- 7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
Connect the accelerator pedal position sensor connector.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 3. PERFORM INITIALIZATION |
Perform initialization (Click here).
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
