2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL ACCELERATOR PEDAL ROD

NOTICE:
This accelerator pedal does not require lubrication.
Do not apply oil or other lubrication to the accelerator pedal rod.
If applied, the accelerator pedal rod must be replaced.

  1. A099092E01
    Install the accelerator pedal rod with the 2 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Connect the accelerator pedal position sensor connector.


2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

← REMOVAL (from Jun 2011)INSTALLATION (Aug 2012 – Jul 2013) →