2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE ENGINE ASSEMBLY
  1. Remove the engine assembly (Click here).


3. REMOVE CYLINDER HEAD SUB-ASSEMBLY
  1. Remove the cylinder head (Click here).


4. REMOVE KNOCK SENSOR

  1. A075662E01
    Disconnect the sensor connector.

  1. Remove the bolt and sensor.

← COMPONENTS (from Aug 2013)REMOVAL (Aug 2012 – Jul 2013) →