REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE ENGINE ASSEMBLY |
Remove the engine assembly (Click here).
| 3. REMOVE CYLINDER HEAD SUB-ASSEMBLY |
Remove the cylinder head (Click here).
| 4. REMOVE KNOCK SENSOR |
Disconnect the sensor connector.

Remove the bolt and sensor.
