2014 Hilux · Service Manual RESTRAINTS

CHECK MODE PROCEDURE

Troubleshooting · Vehicles built from Jun 2011


CHECK MODE (SIGNAL CHECK)
A099015E07
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Select the Signal Check, and perform the check using the intelligent tester.

    HINT:
    1. Check mode is more sensitive to malfunctions than normal mode.
    2. If the normal system code is output in normal mode even when a sensor signal malfunction is suspected, perform the inspection in check mode.

← DTC CHECK / CLEAR (from Aug 2013)DATA LIST / ACTIVE TEST (from Jun 2011) →