2014 Hilux · Service Manual RESTRAINTS

DATA LIST / ACTIVE TEST

System information · Vehicles built from Jun 2011


READ DATA LIST

HINT:
Using the intelligent tester Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Read the Data List according to the display on the tester.

    Center airbag sensor: 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    Display Type Information
    Display type identification information/
    LR: Display is indicated by LH/RH
    DP: Display is indicated by Driver/Passenger
    DP
    -
    Number of Past DTC
    Number of past DTCs recorded/ Min.: 0, Max.: 255
    0
    -

← CHECK MODE PROCEDURE (from Jun 2011)DIAGNOSTIC TROUBLE CODE CHART (Jun 2011 – Jul 2013) →