2014 Hilux · Service Manual SECURITIES

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Jun 2011


CHECK FOR IMMOBILISER DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Immobiliser / DTC.

  5. Check for DTCs.


CHECK FOR ECM DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Engine and ECT / DTC.

  5. Check for DTCs.


CLEAR IMMOBILISER DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Immobiliser / DTC.

  5. Clear the DTCs.


CLEAR ECM DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Engine and ECT / DTC.

  5. Clear the DTCs.

← TERMINALS OF ECU (from Jun 2011)DATA LIST / ACTIVE TEST (from Jun 2011) →