TERMINALS OF ECU
System information · Vehicles built Jun 2011 – Oct 2011
Versions by build date: Jun 2011 – Oct 2011 from Nov 2011
| CHECK THEFT WARNING ECU ASSEMBLY (except 2 Step Unlock Function) |


Disconnect the T36 theft warning ECU assembly connector.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
T36-1 (E) - Body ground
B-W - Body ground
Ground
Always
Below 1 Ω
T36-4 (+B1) -T36-1 (E)
L-Y - B-W
Battery power supply
Always
11 to 14 V
T36-14 (+B2) - T36-1 (E)
LG - B-W
Battery power supply
Always
11 to 14 V
T36-18 (IG) - T36-1 (E)
R-L - B-W
Ignition power supply
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
- If the result is not as specified, there may be a malfunction on the wire harness side.
- If the result is not as specified, there may be a malfunction on the wire harness side.
Reconnect the T36 theft warning ECU assembly connector.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
T36-3 (DMLP) - Body ground*
P - Body ground
Interior lights output signal
Interior lights on
Below 1 V
Interior lights off
11 to 14 V
T36-5 (KSW) - Body ground
G-Y - Body ground
Unlock warning switch input signal
No key in ignition key cylinder
10 kΩ or higher
Key inserted in ignition key cylinder
Below 1 Ω
T36-7 (CTY) - Body ground
R-L - Body ground
All door courtesy switches input signal
One or more doors are open
Below 1 V
All doors are closed
11 to 14 V
T36-13 (SH-) - Body ground
B - Body ground
Security horn output signal
Security horn assembly off
Below 1 V
Security horn assembly on
Pulse generation
T36-25 (L2) - Body ground
L - Body ground
Door lock output signal
Ignition switch off, all doors closed and transmitter switch not pressed
Below 1 V
Ignition switch off, all doors closed and transmitter lock switch pressed
Pulse generation
T36-26 (UL3) -Body ground
L-W - Body ground
Door unlock output signal
Ignition switch off, all doors closed and transmitter switch not pressed
Below 1 V
Ignition switch off, all doors closed and transmitter unlock switch pressed
Pulse generation
T36-28 (HAZD) - Body ground
G-O -Body ground
All hazard warning light output signals
Hazard warning signal switch assembly off
11 to 14 V
Hazard warning signal switch assembly on
Below 1 V
- *: w/ Illuminated Entry Function
- If the result is not as specified, the theft warning ECU assembly may have a malfunction.
- *: w/ Illuminated Entry Function
| CHECK THEFT WARNING ECU ASSEMBLY (for 2 Step Unlock Function) |


Disconnect the T39 theft warning ECU assembly connector.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
T39-1 (E) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
T39-3 (+B1) -T39-1 (E)
L-Y - W-B
Battery power supply
Always
11 to 14 V
T39-4 (IG) - T39-1 (E)
R-L - W-B
Ignition power supply
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
T39-12 (+B2) - T39-1 (E)
LG - W-B
Battery power supply
Always
11 to 14 V
- If the result is not as specified, there may be a malfunction on the wire harness side.
- If the result is not as specified, there may be a malfunction on the wire harness side.
Reconnect the T39 theft warning ECU assembly connector.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
T39-2 (DMLP) - Body ground*
P - Body ground
Interior lights output signal
Interior lights on
Below 1 V
Interior lights off
11 to 14 V
T39-5 (KSW) - Body ground
G-Y - Body ground
Unlock warning switch input signal
No key in ignition key cylinder
10 kΩ or higher
Key inserted in ignition key cylinder
Below 1 Ω
T39-7 (CTY) - Body ground
R-L - Body ground
All door courtesy switches input signal
One or more doors are open
Below 1 V
All doors are closed
11 to 14 V
T39-20 (L2) - Body ground
L - Body ground
Door lock output signal
Ignition switch off, all doors closed and transmitter switch not pressed
Below 1 V
Ignition switch off, all doors closed and transmitter lock switch pressed
Pulse generation
T39-21 (UL3) -Body ground
L-W - Body ground
Door unlock output signal
Ignition switch off, all doors closed and transmitter switch not pressed
Below 1 V
Ignition switch off, all doors closed and transmitter unlock switch pressed
Pulse generation
T39-23 (HAZD) - Body ground
G-O -Body ground
All hazard warning light output signals
Hazard warning signal switch assembly off
11 to 14 V
Hazard warning signal switch assembly on
Below 1 V
T39-26 (SH-) - Body ground
B - Body ground
Security horn output signal
Security horn assembly off
Below 1 V
Security horn assembly on
Pulse generation
- *: w/ Illuminated Entry Function
- If the result is not as specified, the theft warning ECU assembly may have a malfunction.
- *: w/ Illuminated Entry Function
| CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY (INTEGRATION RELAY) |


| *1 |
Integration Relay |
- |
- |
Disconnect the 2A, 2D, 2H and 2L driver side junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
2D-9 (GND) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
2D-18 (GND) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
2H-4 (ALTB) - Body ground
LG - Body ground
Battery power supply
Always
11 to 14 V
2L-12 (BECU) - 2D-9 (GND)
L - W-B
Battery power supply
Always
11 to 14 V
2A-6 (SIG) - Body ground
B-Y - Body ground
Ignition switch
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
- If the result is not as specified, there may be a malfunction on the wire harness side.
- If the result is not as specified, there may be a malfunction on the wire harness side.
Reconnect the 2A, 2D, 2H and 2L driver side junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
2A-4 (L1) - Body ground
L - Body ground
- Power window regulator master switch assembly (door control switch) lock input signal
- Driver side door key-linked lock input signal
- Power window regulator master switch assembly (door control switch) locked
- Driver side door key cylinder in lock position
Below 1 V
- Power window regulator master switch assembly (door control switch) off
- Ignition switch off, all doors closed and driver side door key cylinder in neutral position
11 to 14 V
2D-4 (UL1) - Body ground
L-W - Body ground
- Power window regulator master switch assembly (door control switch) unlock input signal
- Driver side door key-linked unlock input signal
- Power window regulator master switch assembly (door control switch) unlocked
- Driver side door key cylinder in unlock position
Below 1 V
- Power window regulator master switch assembly (door control switch) off
- Ignition switch off, all doors closed and driver side door key cylinder in neutral position
11 to 14 V
2E-3 (PCTY) - Body ground
P - Body ground
All courtesy light switches input signal
One or more doors open
Below 1 V
All doors closed
11 to 14 V
2N-12 (ILE) - Body ground*1
P - Body ground
Ignition key cylinder light output signal
Ignition key cylinder light on
Below 1 V
Ignition key cylinder light off
11 to 14 V
2K-10 (ACT-) - Body ground
L-Y - Body ground
Door lock motor unlock drive output signal (passenger door and rear RH door*2, *4 or rear LH door*3, *4)
Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position
Below 1 V
Lock side of power window regulator master switch assembly (door control switch) pushed, or driver side door key cylinder in unlock position
11 to 14 V
2K-11 (ACT+) - Body ground
L - Body ground
Door lock motor lock drive output signal (passenger door and rear RH door*2, *4 or rear LH door*3, *4)
Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position
Below 1 V
Power window regulator master switch assembly (door control switch) or driver side door key cylinder in lock position
11 to 14 V
2O-10 (KSW) - Body ground
G-Y - Body ground
Unlock warning switch input signal
No key in ignition key cylinder
10 kΩ or higher
Key inserted in ignition key cylinder
Below 1 Ω
2O-27 (DCTY) - Body ground
R-B - Body ground
Front door courtesy light switch assembly LH*2 or RH*3 input signal
Driver side door open
Below 1 V
Driver side door closed
11 to 14 V
2R-27 (ACT-) - Body ground
L-Y - Body ground
Door lock motor unlock drive output signal (driver door, and rear LH door*2, *4 or rear RH door*3, *4)
Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position
Below 1 V
Lock side of power window regulator master switch assembly (door control switch) pushed, or driver side door key cylinder in unlock position
11 to 14 V
2R-28 (ACT+) - Body ground
L - Body ground
Door lock motor LOCK drive output signal (driver door, and rear LH door*2, *4 or rear RH door*3, *4)
Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position
Below 1 V
Lock side of power window regulator master switch assembly (door control switch) pushed, or driver side door key cylinder in unlock position
11 to 14 V
- *1: w/ Illuminated Entry Function
- *2: for LHD
- *3: for RHD
- *4: for Double Cab
- If the result is not as specified, the driver side junction block assembly may have a malfunction.
- Power window regulator master switch assembly (door control switch) lock input signal