INSTALLATION
Removal / installation · Vehicles built from Jun 2011
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
| 1. INSTALL REAR SEATBACK ASSEMBLY |
Place the rear seatback assembly in the cabin.

- NOTICE:
- Be careful not to damage the vehicle body.
Attach the 2 hooks to the vehicle body.
Install the rear seatback assembly with the 2 bolts.
- Torque:
- 39 N*m{ 398 kgf*cm , 29 in.*lbf }
| 2. INSTALL UPPER BACK PANEL GARNISH |
Attach the 5 clips and 4 claws to install the upper back panel garnish.
| 3. INSTALL REAR SEAT CUSHION ASSEMBLY LH (w/ Seat Cushion) |
Attach the 2 hooks.

Attach the hook to install the rear seat cushion assembly LH.

| 4. INSTALL REAR SEAT CUSHION ASSEMBLY RH (w/ Seat Cushion) |
- HINT:
- Use the same procedures described for the LH side.
