2014 Hilux · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Jun 2011

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. INSTALL BENCH TYPE REAR SEATBACK PAD

B277913
  1. Install the bench type rear seatback pad to the rear seatback frame sub-assembly.


2. INSTALL BENCH TYPE REAR SEATBACK COVER

B276918E01
  1. Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with new hog rings.

    Text in Illustration 
    *1
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.


3. INSTALL BENCH TYPE REAR SEAT CUSHION COVER LH (w/ Seat Cushion)

B288343E01
  1. Using hog ring pliers, install the bench type rear seat cushion cover to the rear seat cushion pad with new hog rings.

    Text in Illustration 
    *1
    Hog Ring Pliers

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.


4. INSTALL BENCH TYPE REAR SEAT CUSHION COVER RH (w/ Seat Cushion)

HINT:
Use the same procedures described for the LH side.

← DISASSEMBLY (from Jun 2011)INSTALLATION (from Jun 2011) →