CHECK FOR INTERMITTENT PROBLEMS
Troubleshooting · Vehicles built from Aug 2014
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Intelligent tester:
- Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with an intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which has a higher sensitivity to malfunctions than normal mode (default), which uses 2 trip detection logic.
(b) Change the ECM from normal mode to check mode using the intelligent tester (Click here).
(c) Perform a simulation test (Click here).
(d) Check the connectors and terminal (Click here).
(e) Wiggle the harnesses and connectors (Click here).