2014 Hilux · Service Manual ENGINE

CHECK FOR INTERMITTENT PROBLEMS

Troubleshooting · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014

HINT:
Intelligent tester:
Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with an intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which has a higher sensitivity to malfunctions than normal mode (default), which uses 2 trip detection logic.

(a) Clear the DTCs (Click here).
(b) Change the ECM from normal mode to check mode using the intelligent tester (Click here).
(c) Perform a simulation test (Click here).
(d) Check the connectors and terminal (Click here).
(e) Wiggle the harnesses and connectors (Click here).
← CHECK FOR INTERMITTENT PROBLEMS (Jun 2011 – Jul 2012)CHECK FOR INTERMITTENT PROBLEMS (Aug 2013 – Jul 2014) →