REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
- CAUTION:
- Be sure to read the precautionary notices concerning the SRS airbag system before servicing (Click here).
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (M/T) |
|
| 3.
REMOVE TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY (4WD) |
|
| 4.
REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER
|
 |
Detach the 12 claws and remove the upper console panel.
- NOTICE:
- Be careful not to damage the instrument panel and console box with the claws of the console panel.


Text in Illustration
*A
|
for 2WD
|
*B
|
for 4WD
|
| 5.
REMOVE CONSOLE BOX ASSEMBLY
|
 |
Remove the 4 screws and 2 bolts.
Using a clip remover, remove the 2 clips and console box.
Text in Illustration
*1
|
Screw
|
*2
|
Bolt
|
*3
|
Clip
|
| 6.
REMOVE CENTER AIRBAG SENSOR ASSEMBLY |
 |
Disconnect the sensor connector.
Remove the 3 bolts and sensor.