2014 Hilux · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2013 from Aug 2013

CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing (Click here).


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (M/T)

3. REMOVE TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY (4WD)

4. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER

  1. Detach the 12 claws and remove the upper console panel.

    NOTICE:
    Be careful not to damage the instrument panel and console box with the claws of the console panel.


    B277547E01
    Text in Illustration 
    *A
    for 2WD
    *B
    for 4WD


5. REMOVE CONSOLE BOX ASSEMBLY

B278048E01
  1. Remove the 4 screws and 2 bolts.

  1. Using a clip remover, remove the 2 clips and console box.

    Text in Illustration 
    *1
    Screw
    *2
    Bolt
    *3
    Clip


6. REMOVE CENTER AIRBAG SENSOR ASSEMBLY

H045596
  1. Disconnect the sensor connector.

  1. Remove the 3 bolts and sensor.

← REMOVAL (Jun 2011 – Jul 2013)INSTALLATION (Jun 2011 – Jul 2012) →