2014 Hilux · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE REAR WHEEL

3. REMOVE REAR SPEED SENSOR

  1. Disconnect the sensor connector.

    C225638

  1. Detach the clamp.

  1. Remove the 2 bolts and 2 harness clamps.

  1. Remove the bolt and speed sensor LH.

  1. Disconnect the sensor connector.

    C225637

  1. Detach the connector.

  1. Detach the 2 clamps.

  1. Remove the bolt and harness clamp.

  1. Remove the bolt and speed sensor RH.

← ON-VEHICLE INSPECTION (from Jun 2011)REMOVAL (Aug 2012 – Jul 2013) →