2014 Hilux · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. DRAIN BRAKE FLUID

NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.


3. REMOVE BRAKE ACTUATOR ASSEMBLY WITH BRACKET

  1. Place tags or marks to identify the installation locations of each brake line.

    C111279E02

  1. Release the latch of the actuator connector and disconnect the connector.

  1. Using a union nut wrench, disconnect the 5 brake lines from the actuator.

    C212867E01

  1. C121396
    for LHD:
    Remove the 3 bolts and actuator with bracket.

    NOTICE:
    Be careful not to damage the brake tubes.

  1. C125518
    for RHD:
    Remove the 3 nuts and actuator with bracket.

    NOTICE:
    Be careful not to damage the brake tubes.

← REMOVAL (Aug 2012 – Jul 2013)DISASSEMBLY (from Jun 2011) →